Our T series steering gearbox’ gear is made of low carbon alloy steel, and the tooth surface is carburized and hardened. It has a long service life, a large input power range, stable operation, low noise, and high efficiency of 95%-98%. It is widely used in the industrial applications. At present, the steering gearbox has been standardized and diversified in specifications. The steering gearbox can run forward and reverse, and run smoothly at low speed or high speed. When the speed ratio of the steering box is not 1:1, the input of the horizontal shaft and the output of the vertical shaft are deceleration, the input of the vertical shaft and the output of the horizontal shaft are the acceleration.
|Product name:||T series steering gearbox|
|Installation form:||foot installation|
|Shaft configuration:||single horizontal shaft, double horizontal shafts, single vertical shaft, double vertical shafts|
|Product Model:||T2, T4, T6, T7, T8, T10, T12, T16, T20, T25|
|Speed ratio:||1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1|
|Application industries:||food machinery, chemical machinery, woodworking machinery, pharmaceutical machinery, agricultural machinery, textile equipment, smelting equipment, medical equipment and other industries|
|Housing:||cast with high rigidity FC-25 cast iron|
|Gear:||made of alloy steel 20CrMnTi quenched and tempered, carburized and quenched, the hardness is as high as 58-62HRC|
|Worm:||made of alloy steel 40Cr quenched and tempered, with higher strength and toughness, and greater load capacity|
|Bearing:||heavy-duty tapered roller bearings|
|Oil seal:||imported double-lip oil seal, which has high dust-proof and oil-leakage resistance. Anti-friction and anti-aging, the working temperature can reach -25-120℃|
There are no reviews yet.